PTW IEC_61363 Short Circuit Study

The IEC_61363 Short Circuit Study module calculates the current that flows in an electrical
power system under abnormal conditions. These currents must be calculated in order to
adequately specify electrical apparatus withstand and interrupt ratings and selectively
coordinate time current characteristics of electrical protective devices.

The IEC_61363 Short Circuit study represents conditions that may affect typical marine or
offshore installations more significantly than land-based systems, including more emphasis
on generator and motor decay.

The calculation methods are intended for use on unmeshed three-phase a.c. systems
operating at 50Hz or 60Hz; having any system voltage specified in IEC 60092-201 table 2;
having one or more different voltage levels; comprising generators, motors, transformers,
reactors, cables and converter units; having their neutral point connected to the ship’s hull
through an impedance; or having their neutral point isolated from the ship’s hull.
PTW IEC_61363 Short Circuit Study

Benefits:

Save time by easily obtaining the short circuit magnitude at each point in the power system.
Design safer systems by comparing the calculated fault current to the ratings of installed equipment.
Increase design reliability by supporting proper selection of circuit protection equipment for protection and coordination.
Reports ac and dc current for 4 user defined times.
Reports zero crossing time of total current.

Interface Options:

Using Existing IEC909 input data with minimum IEC363 specified data required.
Study report options to include different levels of calculation detail.
Options to use Load Flow Results, Per Unit U0 (I0=0), or Rated U0 and I0 as the initial voltage and current.

 

» Request form
» Click Here for a Printable Product Flyer - (.pdf)